Brige Configuration Orange_2x-80.jpg

BRIDGE

In the bridge configuration, two runway rails are mounted on each side of the scaffold.

Two trolleys drive on the runway rails and carry a bridge up to 20 meters long.

In this configuration, Conhoist can cover the entire roof or construction site.

ITEMS NEEDED FOR
BRIDGE

Bridge Config Items_2x.png
Mono Config in Scaffold_2x-80.jpg

MONO

In the mono configuration, Conhoist drives directly on the runway rails. As many rails as needed can be placed in line. 

The mono configuration is ideal for hoisting materials from the ground and onto the roof surface. Or it can sit along facades and lift facade elements.

ITEMS NEEDED FOR
MONO

Mono Config Items_2x.png
Curve Config_2x-80.jpg

CURVE

With the curved runway sections, Conhoist can drive around corners. In this way, Conhoist can cover an entire building and thus be of great use when installing facade elements such as windows, panels, etc.

In the curve configuration, Conhoist itself is hanging underneath two trolleys. The two trolleys allow Conhoist to drive around the curved runway sections.

ITEMS NEEDED FOR
CURVE

Curve Config Items_2x.png